NetComm Wireless NF18ACV

VDSL/ADSL2+ Dual Band AC1600 Gigabit Gateway with VoIP – NF18ACV
58 of 93
UG01040 v 1.04 December 2018
© NetComm Wireless 2018
Management – TR-069 Client
TR-069 enables provisioning, auto-configuration or diagnostics to be automatically performed on your router if supported by your Internet Service Provider (ISP).
Select Enable WAN Management Protocol (TR-069) to display the TR-069 settings.
I T E M
D E F I N I T I O N
Inform
Set to enable to TR-069 client inform session initialization.
Inform interval
Time in seconds that inform session data is sent to the Auto-Configuration Server (ACS).
ACS URL
The address where the ACS server is located.
ACS User Name
The user name to access the ACS server.
ACS Password
The password to access the ACS server.
WAN Interface used by TR-
069 Client
The interface connection used to send and receive data to the ACS server.
Display SOAP messages on
serial console
Select Enable to view the SOAP messages on a command prompt screen.
Apply/Save button
Click to save your settings and start the TR-069 services.
Get RPC Methods button
Click to retrieve Remote Procedure Call (RPC) Methods.