VDSL/ADSL2+ Dual Band AC1600 Gigabit Gateway with VoIP – NF18ACV
UG01040 v 1.04 December 2018
Connection Request Authentication
Normally TR-069 sessions are initiated by the NF18ACV, however sometimes there is a need for a remote auto configuration
server (ACS) to request that the NF18ACV contact it immediately, effectively initiating the session. To do this, TR-069 defines
a Connection Request mechanism in CWMP, which allows the ACS to stimulate the NF18ACV to begin a session.
To ensure appropriate security, this request must be authenticated using a Username and Password.
Select Connection Request Authentication to display the TR-069 security and connection settings.
Connection Request Username
Enter the username to be used by the ACS to initiate the connection for a TR-069
session with the NF18ACV.
Connection Request Password
Enter the password to be used by the ACS to initiate the connection for a TR-069
session with the NF18ACV.
Enter the Port number to be used by the ACS when connecting to the NF18ACV for a
TR-069 session.
Enter the URL address to be used by the ACS for a TR-069 session with the NF18ACV.
To Next Page
Loading...
Need help?
General
