NetComm Wireless NF18ACV User Manual

VDSL/ADSL2+ Dual Band AC1600 Gigabit Gateway with VoIP – NF18ACV
40 of 93
UG01040 v 1.04 December 2018
© NetComm Wireless 2018
Diagnostics – Information
The top part of the Diagnostics – Information page contains Device Info such as hardware and software versions, etc. as well as the current status of the WAN connection. The lower part of the page
contains WAN connection, Route and ARP (Address Resolution Protocol) details.
The first group of Device info describes the physical device and details of its hardware and software.
I T E M
D E F I N I T I O N
Manufacturer
Indicates that NetComm Wireless is the manufacturer of this product.
Product Class
The model of the product.
Serial Number
The unique set of numbers assigned to the routers for identification
purposes.
Build Timestamp
The date and time that the software running on the router was
published.
Software Version
The current firmware version installed on the router.
Bootloader (CFE) Version
The current boot loader version installed on the router.
DSL PHY and Driver Version
The driver version of the on-board DSL chip.
VDSL PROFILE
The VDSL profile in use.
NF18ACV supports 8a, 8b, 12a and 17a VDSL profiles.
DSL PHY and Driver Version
The current line driver installed on the router.
Wireless Driver Version
The current wireless driver installed on the router.
Voice Service Version
“Voice” is the only option currently available.
Uptime
The number of days, hours and minutes that the router has been
running.

NetComm Wireless NF18ACV Specifications

General

Model	NF18ACV
Category	Gateway
WiFi Standard	802.11ac
Ethernet Ports	4 x Gigabit Ethernet
USB Ports	1 x USB 2.0
VoIP	2 x FXS Ports
WiFi Bands	Dual Band (2.4GHz & 5GHz)
WAN Port	1 x Gigabit Ethernet
Security	WPA/WPA2
DSL	VDSL2 / ADSL2+ / ADSL2 / ADSL