EasyManua.ls Logo

NetComm Wireless NF18ACV

NetComm Wireless NF18ACV
93 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
VDSL/ADSL2+ Dual Band AC1600 Gigabit Gateway with VoIP NF18ACV
63 of 93
UG01040 v 1.04 December 2018
© NetComm Wireless 2018
DHCP Server IP Address
Enter the DHCP server IP address.
Apply button
Click to save your settings and start the SNMP services.
Use the DHCP Static IP Lease facility to reserve DHCP Addresses for specific hosts.
Click the Add Entries button to open the DHCP Static IP Lease dialog.
Enter the MAC Address of the chosen host and Static IP Address and the click the Apply/Save button.
Up to 32 Static IP Leases can be created and managed at the same time.
To manage you lease list, click the Delete button to permanently remove a lease from the list.
Click the Add button to open the DHCP Option Setup dialog.
Select the State as Enable to have the option available for use.
If the State as Disable the option will remain in the list, but no be active.
Enter a Code of 1 to 254.
Enter a Value, maximum length is 255.
Click the Apply/Save button to apply and save the changes.
To manage you option list, click the Delete button to permanently remove an option from the list.

Table of Contents

Other manuals for NetComm Wireless NF18ACV