NetComm Wireless NF18ACV User Manual

VDSL/ADSL2+ Dual Band AC1600 Gigabit Gateway with VoIP – NF18ACV
86 of 93
UG01040 v 1.04 December 2018
© NetComm Wireless 2018
I T E M
D E S C R I P T I O N
Traffic Class Name
Enter a name reflecting the priority of the defined rule, for example: PC1HighPriority
Rule Order.
Leave as Last.
Rule Status
Set to Enable.
Class Interface
Set the Class Interface according to how the device connects to the router.
Options are: LAN, Wireless, Local and USB
Ether Type
Set the Ether Type to IP(0x800).
Other options include ARP(0x8086), Ipv6(0x86DD), PPPoE_DISC(0x8863), 8865(0x8865), 8866(0x8866), 8021Q(0x8100).
Source MAC Address
Enter the Source MAC Address of the device, the unique 12 character signature with every 2 characters separated by
a colon(:), that you previously entered to reserve the device's IP address.
Source IP Address
Enter the Source IP Address of the device that you previously entered into the Static IP Lease List, in the range of
192.168.1.x
Destination MAC Address
Enter a Destination MAC Address if the connection is to a single device. This is useful for VPN connections.
If you wish the destination MAC address to be any address leave the field blank.
Destination IP Address
Enter a Destination IP Address if the connection is to a single device. This is useful for VPN connections.
If you wish the destination IP address to be any address leave the field blank.
Destination Subnet Mask
Enter a Destination Subnet Mask if you have entered a Destination MAC address and Destination IP address.
This would normally be 255.255.255.0 unless your system administrator advises otherwise.
If you have not entered a Destination MAC or IP address leave the field blank.
Differentiated Service Code
Point (DSCP)
Set the Differentiated Service Code Point (DSCP) Check to EF(101110).
Protocol
Set the Protocol to TCP. Other options include UDP, ICMP or IGMP.
Assign Classification Queue
Set Priority 1 for the highest priority with priority 3 being the lowest. Priority 2 is in between
Mark Differentiated Service
Code Point (DSCP)
Set Mark Differentiated Service Code Point (DSCP) as AF11(001010)
Mark 802.1p Priority
The scale 0~7, with 6 and 7 are reserved for networking performance.
Set 5 as the highest priority, set 0 for lowest priority.
Apply/Save button
Click to save the new Network Class Traffic Rule.

NetComm Wireless NF18ACV Specifications

General

Model	NF18ACV
Category	Gateway
WiFi Standard	802.11ac
Ethernet Ports	4 x Gigabit Ethernet
USB Ports	1 x USB 2.0
VoIP	2 x FXS Ports
WiFi Bands	Dual Band (2.4GHz & 5GHz)
WAN Port	1 x Gigabit Ethernet
Security	WPA/WPA2
DSL	VDSL2 / ADSL2+ / ADSL2 / ADSL