Router Internet Setup
21
N150 Wireless ADSL2+ Modem Router DGN1000
Log In to the N150 Modem Router
Log in to the wireless modem router to view or change settings or to set up the wireless
modem router.
To log in:
1. Type http
://192.168.0.1 in the address field of your browser and press Enter to display
the login window. You can also enter either of these addresses to access the wireless
modem router: http://www.routerlogin.net or http://www.routerlogin.com.
2. When prompted, enter admin for the router user name and password for the router
password, both in lowercase letters.
Note: The router user name and password are probably different from the
user name and password for logging in to your Internet connection.
See Types of Logins on page 30 for more information.
The router menus display where you can do things like chang
e settings or add other
devices to your network. See Router Interface on page 23
for a brief description of the
available functionality, and Wi-Fi Protected Setup (WPS) Method on page 35
for
information about adding devices to your network.
If you do not see the login prompt:
1. Che
ck the LEDs on the router front panel to make sure that the modem router is plugged
into an elect
rical outlet, its power is on, and the Ethernet cable between your computer
and the router is connected to a LAN port.
2. If you connected the Ethernet cable, quickly launched your browser, and typed in the router
URL, your computer
might need a minute or two to recognize the LAN connection. Relaunch
your browser and try again.
3. If you are having trouble accessing the rout
er wirelessly, use an Ethernet cable to connect
your computer during setup so that you can log in to the wireless modem router.
To Next Page
Loading...
Need help?
General
