NETGEAR DGN1000 User Manual

Network Maintenance
65
N150 Wireless ADSL2+ Modem Router DGN1000
Erase
 To erase the configuration and restore to factory defaults:
Under some circumstances (for example, if you move the router to a different network or if
you have forgott
en the password), you might want to erase the configuration and restore the
factory default settings.
Click the Erase butto
n to reset the wireless modem router to its factory default settings.
Alternately, press the Wireless On/Off and WPS buttons on the side panel of the wireless
modem router simultaneously for 6 seconds.
Erase sets the user name to admin, the password to password, the LAN IP address to
1
92.168.1.1, and enables the wireless modem router’s DHCP.
To restore the factory default configuration settings when you do not know the login password
o
r IP address, use the restore factory settings button on the bottom of the router (see Factory
Settings on p
age 94).

NETGEAR DGN1000 Specifications

General

Wireless Standard	802.11b/g/n
Frequency Band	2.4 GHz
Wireless Speed	Up to 150 Mbps
LAN Ports	4 x 10/100 Mbps
WAN Port	1 x ADSL2+
Security	WEP, WPA, WPA2
Firewall	SPI, NAT
Antenna	Internal
Weight	0.6 lbs