Security Settings
57
N150 Wireless ADSL2+ Modem Router DGN1000
Schedule Firewall Services
If you enabled services blocking in the Block Services screen or port forwarding in the Ports
screen, you can set up a schedule for when blocking occurs or when access is not restricted.
To schedule firewall services:
1. Select Security > Schedul
e to display the following screen:
Figure 13. Block Internet services based on a schedule
2. To block Internet services based on a schedule, select Every Day or select one or more
days. If you want to limit access completely for the selected days, select All Day. Otherwise,
to limit access during certain times for the selected days, enter times in the Start Time and
End Time fields.
Note: Enter the values in 24-hour time format. For example, 10:30 a.m.
would be 10
hours and 30 minutes, and 10:30 p.m. would be 22
hours and 30 minutes. If you set the start time after the end time, the
schedule is effective through midnight the next day.
3. Click Apply to save your settings.
To Next Page
Loading...
Need help?
General
