Advanced Settings
79
N150 Wireless ADSL2+ Modem Router DGN1000
Advanced Wireless Settings
To configure advanced wireless settings:
1. Select Advanced > W
ireless Settings to display the following screen:
Note: The advanced WPS settings section is not displayed if you selected
WEP as the security option.
2. If you make changes, click Apply. Note that the WLAN settings come from the settings you
made in the Wireless Settings Screen on page 37).
WL
AN.
Name (SSID). The service set ID, a
lso known as the wireless network name.
Region. The coun
try where the unit is set up for use.
Channel. The curr
ent channel, which determines the operating frequency.
Wireless AP. Indicates if the
access point feature is enabled. If disabled, the Wireless
LED on the front panel is off.
Broadcast Name. Indicates if t
he wireless modem router is configured to broadcast
its SSID.
Security. Indicates if security is
configured on the wireless modem router, and if so,
what type of security is configured.
WPS Settings.
Router’s PIN. The PIN number th
at you use on a registrar (for example, from the
Network Explorer on a Vista Windows PC) to configure the wireless modem router’s
wireless settings through WPS. You can also find the PIN on the wireless modem
router's product label.
To Next Page
Loading...
Need help?
General
