NETGEAR FS728TPv2 User Manual

Chapter 3: Configuring Switching Information | 119
FS728TP Smart Switch Software Administration Manual
To configure a static MAC address:
1. To add a static MAC address entry
a. Select the VLAN ID corresponding to the MAC address to add.
b. Specify the MAC address to add.
c. Specify the interface associated with the MAC address.
d. Click Add.
2. To delete a static MAC address, select the check box next to the entry and click Delete.
3. To modify the settings for a static MAC address, select the check box next to the entry,
update the desired values, and click Apply.
4. Click Refresh to reload the page and display the latest MAC address learned on a specific
port.
5. Click Cancel to cancel the configuration on the screen and reset the data on the screen to
the latest value of the switch.

NETGEAR FS728TPv2 Specifications

General

Brand	NETGEAR
Model	FS728TPv2
Category	Switch
Language	English