218 | Chapter 7: Maintenance
FS728TP Smart Switch Software Administration Manual
non-active image. This is a safety feature for faults occurring during the boot upgrade
process.
• Text Configuration: A text-based configuration file enables you to edit a configured
text file (startup-config) offline as needed without having to translate the contents for
the switch to understand. The most common usage of text-based configuration is to
upload a working configuration from a device, edit it offline to personalize it for
another similar device (for example, change the device name, serial number, IP
address), and download it to that device.
2. If you are uploading an FS728TP image (Code), select the image on the switch to upload to
the management system. This field is visible only when Code is selected as the File Type.
3. Click Apply. A window appears to allow you to open the text file on the management system
or to save the image or text file to the management system.
4. Click Cancel to cancel the operation on the screen and reset the data on the screen to the
latest value of the switch.
To Next Page
Loading...
Need help?
General