NETGEAR FVS318G - ProSafe Gigabit VPN Firewall Data Sheet Router User Manual

ProSafe Gigabit 8 Port VPN Firewall FVS318G Reference Manual
5-20 Virtual Private Networking Using IPsec
1.1 November, 2009
2. Click the RADIUS Client tab. The RADIUS Client screen is displayed.
3. To activate (enable) the Primary RADIUS server, click the Yes radio button. The primary
server options become active.
4. Configure the following entries:
• Primary RADIUS Server IP address. The IP address of the RADIUS server.
• Secret Phrase. Transactions between the client and the RADIUS server are authenticated
using a shared secret phrase, so the same Secret Phrase must be configured on both client
and server.
• Primary Server NAS Identifier (Network Access Server). This Identifier MUST be
present in a RADIUS request. Ensure that NAS Identifier is configured identically on both
client and server.
Figure 5-19

NETGEAR FVS318G - ProSafe Gigabit VPN Firewall Data Sheet Router Specifications

General

Model	FVS318G
Category	Network Router
VPN Tunnels	25
VPN Throughput	25 Mbps
VPN Protocols	IPSec, PPTP, L2TP
Humidity	90% maximum relative humidity, non-condensing
WAN Ports	1
LAN Ports	8
Weight	1.4 kg (3.1 lb)
Firewall Security	SPI, DoS
Flash Memory	8 MB
Operating Temperature	0° to 40°C
Storage Temperature	-20° to 70°C