EasyManua.ls Logo

NETGEAR FVS318G - ProSafe Gigabit VPN Firewall Data Sheet Router

NETGEAR FVS318G - ProSafe Gigabit VPN Firewall Data Sheet Router
180 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
ProSafe Gigabit 8 Port VPN Firewall FVS318G Reference Manual
4-26 Firewall Protection and Content Filtering
1.1 November, 2009
Configuring IP/MAC Address Binding Alerts
You can configure the FVS318G to drop packets and generate an alert when a device appears to
have hijacked or spoofed another device’s IP address. An IP address can be bound to a specific
MAC address either by using a DHCP reserved address (see “Configuring DHCP Address
Reservation” on page 3-9) or by manually binding in the IP/MAC Binding menu.
To enable IP/MAC address binding enforcement and alerts:
1. Select Security > Address Filter > IP/MAC Binding to display the Source MAC Filter tab
page.
2. In the Email IP/MAC Violations frame, check the Yes radio button to enable IP/MAC address
binding enforcement and alerts. Email alerts must be enabled (see “E-Mail Notifications of
Event Logs and Alerts” on page 4-33).
3. Click Apply.
Figure 4-12

Table of Contents

Other manuals for NETGEAR FVS318G - ProSafe Gigabit VPN Firewall Data Sheet Router

Related product manuals