NETGEAR FVS318G - ProSafe Gigabit VPN Firewall Data Sheet Router User Manual

ProSafe Gigabit 8 Port VPN Firewall FVS318G Reference Manual
Introduction 1-7
1.1 November, 2009
Rear Panel Features
The rear panel of the ProSafe VPN Firewall includes a cable lock receptacle, and reset factory
defaults switch, and a DC power connection.
Viewed from left to right, the rear panel contains the following elements:
• Cable security lock receptacle.
• Factory Defaults button: Using a sharp object, press and hold this button for about ten seconds
until the front panel TEST light flashes to reset the VPN firewall to factory default settings.
All configuration settings will be lost and the default password will be restored.
• DC power receptacle: 12V @ 1.5A.
Figure 1-2

NETGEAR FVS318G - ProSafe Gigabit VPN Firewall Data Sheet Router Specifications

General

Model	FVS318G
Category	Network Router
VPN Tunnels	25
VPN Throughput	25 Mbps
VPN Protocols	IPSec, PPTP, L2TP
Humidity	90% maximum relative humidity, non-condensing
WAN Ports	1
LAN Ports	8
Weight	1.4 kg (3.1 lb)
Firewall Security	SPI, DoS
Flash Memory	8 MB
Operating Temperature	0° to 40°C
Storage Temperature	-20° to 70°C