NETGEAR FVS318G - ProSafe Gigabit VPN Firewall Data Sheet Router User Manual

ProSafe Gigabit 8 Port VPN Firewall FVS318G Reference Manual
7-10 Router and Network Management
1.1 November, 2009
Enabling Remote Management Access
Using the Remote Management page, you can allow an administrator on the Internet to configure,
upgrade, and check the status of your VPN firewall. You must be logged in locally to enable
remote management (see “Logging into the VPN Firewall Router Router” on page 2-2).
To configure your firewall for Remote Management:
1. Select Administration > Remote Management from the main menu The Remote
Management screen is displayed.
Note: Be sure to change the default configuration password of the firewall to a very
secure password. The ideal password should contain no dictionary words from any
language, and should be a mixture of letters (both upper and lower case), numbers,
and symbols. Your password can be up to 30 characters. See “Changing Passwords
and Administrator Settings” on page 7-8 for the procedure on how to do this.

NETGEAR FVS318G - ProSafe Gigabit VPN Firewall Data Sheet Router Specifications

General

Model	FVS318G
Category	Network Router
VPN Tunnels	25
VPN Throughput	25 Mbps
VPN Protocols	IPSec, PPTP, L2TP
Humidity	90% maximum relative humidity, non-condensing
WAN Ports	1
LAN Ports	8
Weight	1.4 kg (3.1 lb)
Firewall Security	SPI, DoS
Flash Memory	8 MB
Operating Temperature	0° to 40°C
Storage Temperature	-20° to 70°C