NETGEAR FVS318G - ProSafe Gigabit VPN Firewall Data Sheet Router User Manual

6-1
1.1 November, 2009
Chapter 6
Managing Users, Authentication, and Certificates
This chapter contains the following sections:
• “Managing Users” on page 6-1
• “Managing Certificates” on page 6-7
Managing Users
The VPN Firewall has one administrator account and one guest account. The administrator can
login and reconfigure the VPN firewall. The guest can login and display in formation but cannot
change settings. The default name and password for the administrator is admin and password. The
default name and password for the guest is guest and password.VPN firewall. IPsec VPN clients
are only needed if you have enabled Extended Authentication (XAUTH) in your IPsec VPN
configuration.
Users connecting to the VPN firewall must be authenticated before being allowed to access the
VPN firewall or the VPN-protected network. The login window presented to the user requires a
User Name and a Password.
Note: IPsec VPN users will always belong to the default domain (geardomain).

NETGEAR FVS318G - ProSafe Gigabit VPN Firewall Data Sheet Router Specifications

General

Model	FVS318G
Category	Network Router
VPN Tunnels	25
VPN Throughput	25 Mbps
VPN Protocols	IPSec, PPTP, L2TP
Humidity	90% maximum relative humidity, non-condensing
WAN Ports	1
LAN Ports	8
Weight	1.4 kg (3.1 lb)
Firewall Security	SPI, DoS
Flash Memory	8 MB
Operating Temperature	0° to 40°C
Storage Temperature	-20° to 70°C