ProSafe Gigabit 8 Port VPN Firewall FVS318G Reference Manual
4-18 Firewall Protection and Content Filtering
1.1 November, 2009
Modifying a Service
To edit the parameters of an existing service:
1. In the Custom Services Table, click the Edit button adjacent to the service you want to edit.
The Edit Service screen is displayed.
2. Modify the parameters you wish to change.
3. Click Apply to confirm your changes. The modified service is displayed in the Custom
Services Table.
Setting Quality of Service (QoS) Priorities
The QoS setting determines the priority of a service, which in turn determines the quality of that
service for the traffic passing through the firewall. You can change the QoS Priority:
• On the Services screen in the Custom Services Table for customized services (see Figure 4-7).
• On the Add LAN WAN Outbound Services screen:
Figure 4-8
To Next Page
Loading...
