ProSafe Gigabit 8 Port VPN Firewall FVS318G Reference Manual
Managing Users, Authentication, and Certificates 6-5
1.1 November, 2009
1. Select Users from the main menu and Local Authentication from the submenu.
2. Select the Settings you wish to edit by checking either the Edit Admin Settings or Edit Guest
Settings radio box.
3. Change the password by first entering the old password, and then entering the new password
twice.
4. Click Apply to save your settings or Cancel to return to your previous settings.
5. Change the Idle Logout Time field to the number of minutes you require. The default is 5
minutes.
6. Click Apply to save this setting.
Figure 6-4
Note: If you make the administrator login time-out value too large, you will have to
wait a long time before you are able to log back into the router if your previous
login was disrupted (i.e., you did not click Logout on the Main Menu bar to
log out).
To Next Page
Loading...
