ProSafe Gigabit 8 Port VPN Firewall FVS318G Reference Manual
7-16 Router and Network Management
1.1 November, 2009
1. Select Administration > Settings Backup and Firmware Upgrade from the main menu. The
Settings Backup and Firmware Upgrade screen is displayed.
2. Click Backup to save a copy of your current settings.
• If your browser isn’t set up to save downloaded files automatically, locate where you want
to save the file, specify file name, and click Save.
• If you have your browser set up to save downloaded files automatically, the file will be
saved to your browser’s download location on the hard disk.
To restore settings from a backup file:
1. Next to Restore save settings from file, click Browse.
2. Locate and select the previously saved backup file (by default, netgear.cfg).
3. When you have located the file, click restore.
An Alert page will appear indicating the status of the restore operation. You must manually
restart the VPN firewall router for the restored settings to take effect.
Figure 7-6
Warning: Once you start restoring settings or erasing the VPN firewall, do NOT
interrupt the process. Do not try to go online, turn off the VPN firewall,
shut down the computer or do anything else to the VPN firewall until it
finishes restarting!
To Next Page
Loading...
