ProSafe Gigabit 8 Port VPN Firewall FVS318G Reference Manual
3-14 LAN Configuration
1.1 November, 2009
• Both. The VPN firewall broadcasts its routing table and also processes RIP information
received from other routers.
• Out Only. The VPN firewall broadcasts its routing table periodically but does not accept
RIP information from other routers.
• In Only. The VPN firewall accepts RIP information from other routers, but does not
broadcast its routing table.
4. From the RIP Version pull-down menu, choose the version from the following options:
• RIP-1. A classful routing that does not include subnet information. This is the most
commonly supported version.
• RIP-2. Supports subnet information. Both RIP-2B and RIP-2M send the routing data in
RIP-2 format:
– RIP-2B. Sends the routing data in RIP-2 format and uses subnet broadcasting.
– RIP-2M. Sends the routing data in RIP-2 format and uses multicasting.
5. Authentication for RIP2B/2M required? If you selected RIP-2B or RIP-2M, check YES the
feature, and input the First Key Parameters and Second Key Parameters, MD-5 keys to
authenticate between routers.
6. Click Apply to save your settings.
To Next Page
Loading...
