NETGEAR Nighthawk M7 Pro - Set up for Travel or Fixed Use; Travel Setup; Charge the Battery

To install or replace a SIM card:
1. Remove the mobile hotspot back cover by lifting the corners.
2. Remove the battery.
3. If a SIM card is already installed, slide the SIM card out of its slot.
4. Insert the replacement SIM card in the slot.
5. Reinstall the battery.
6. Reinstall the back cover.
Set up for travel or fixed use
You can set up your mobile hotspot for travel usage using battery power, or you can
set it up for fixed usage inside a home or office using wall power for extra performance.
Travel setup
To set up your mobile hotspot for travel usage, install and fully charge the battery before
turning the device on.
Charge the battery
Your mobile hotspot battery comes partially charged. We recommend that you fully
charge the battery before using your mobile hotspot away from home.
User Manual12Overview and Setup
Nighthawk M7 Pro