Disable or re-enable device
analytics from the web user
interface
NETGEAR improves its products and services by automatically sending daily diagnostic
and usage data. Device analytics are enabled by default. You can disable or re-enable
device analytics from the web user interface.
To disable or re-enable device analytics from the web user interface:
1. From the web user interface dashboard, select Settings > Advanced > Analytics.
The Analytics page displays.
2. Clear the Enabled check box to disable device analytics, or select it to re-enable
device analytics.
3. Click or tap Apply.
Your settings are saved.
Enable or disable GPS services from
the web user interface
You can enable GPS location services on some mobile hotspot models. When GPS is
enabled,users can turn on location services to launch GPS-enabled apps on connected
devices.
To enable or disable GPS services from the web user interface:
1. From the web user interface dashboard, select Settings > Advanced > GPS.
The GPS page displays.
2. Select the Enabled check box to enable GPS services, or clear it to disable GPS
services.
3. Click or tap Apply.
Your settings are saved.
User Manual75Access the web user interface
Nighthawk M7 Pro
To Next Page
Loading...
