NETGEAR Nighthawk M7 Pro - Enable or Disable Ethernet

The lock screen displays.
2. Swipe up to unlock your mobile hotspot.
The home screen displays.
3. Tap WiFi > Options > WiFi Standby.
The WiFi Standby page displays.
4. Tap a WiFi standby option.
The minimum setting is Never, and the maximum setting is 60 minutes.
5. Tap Ok.
Your WiFi standby setting is saved.
Enable or disable Ethernet
You can manually enable or disable your mobile hotspot's Ethernet port independently
of using Plugged-In Mode. Depending on the power mode you are currently using,
Ethernet might be enabled or disabled by default.
To enable or disable Ethernet:
1. Quickly press and release the Power button to wake your mobile hotspot.
The lock screen displays.
2. Swipe up to unlock your mobile hotspot.
The home screen displays.
3. Tap Ethernet.
The Ethernet page displays.
The icon in the top right corner displays ON or OFF to indicate the current Ethernet
status.
4. Tap the ON or OFF icon.
Your mobile hotspot asks you to confirm that it must restart to enable or disable
Ethernet.
5. Tap Continue.
Your mobile hotspot restarts with Ethernet enabled or disabled.
User Manual39Adjust network, security, and
performance settings
Nighthawk M7 Pro