NETGEAR Nighthawk M7 Pro - View Data Usage from the Web User Interface; Configure Cellular Settings from the Web User Interface

this feature if you allow devices that you do not trust to connect to your mobile hotspot
WiFi network.
To enable or disable client privacy from the web user interface:
1. From the web user interface dashboard, select Settings > Advanced > Mobile
Router Setup.
The Mobile Router Setup page displays.
2. In the CLIENT PRIVACY section, select the Isolate all client (Ethernet, USB, WiFi)
data from each other check box to enable client privacy, or clear it to disable client
privacy.
3. Click or tap Apply.
Your settings are saved.
View data usage from the web user
interface
To view data usage from the web user interface:
1. From the web user interface dashboard, click or tap See data usage, or select
Settings > Advanced > Data Usage.
The Data Usage page displays.
2. (Optional) To reset the data usage counter, click or tap Reset.
The counter is reset.
3. (Optional) To set a regular reset date or data plan limit, select the appropriate check
box and enter or select your desired values.
4. Click or tap Apply.
Your settings are saved.
Configure cellular settings from the
web user interface
To configure cellular settings from the web user interface:
1. From the web user interface dashboard, select Settings > Advanced > Cellular.
User Manual70Access the web user interface
Nighthawk M7 Pro