Airplane Mode is enabled.
5. To disable Airplane Mode after enabling it, tap ON > Ok from the Airplane Mode
page.
Airplane Mode is disabled.
Manually check for software and
firmware updates
Your mobile hotspot will notify you when it detects the availability of new software or
firmware. However, you can also check for updates manually. Because software and
firmware updates typically improve device performance and usability, we recommend
that you update your hotspot whenever possible.
NOTE: Updating your mobile hotspot temporarily interrupts your network
connection. Make sure that you are prepared to lose connectivity before starting
the update process.
To manually check for software and firmware updates:
1. Quickly press and release the Power button to wake your mobile hotspot.
The lock screen displays.
2. Swipe up to unlock your mobile hotspot.
The home screen displays.
3. Tap Settings > Software.
The Software Update page displays.
4. Tap the Check for updates button.
The screen refreshes, showing any available update.
5. Do one of the following:
•
If an upgrade is available and you want to install it, tap the Update now button
to install the update.
•
To postpone the update, tap Postpone.
If you tap Update now, the update proceeds.
If you tap Postpone, a message displays indicating that the update will be postponed
for 4 hours. You can then click Apply to accept the postponed update.
When the wait period is complete, after you are prompted to continue the update,
tap Continue Update.
User Manual44Adjust network, security, and
performance settings
Nighthawk M7 Pro
To Next Page
Loading...
