NETGEAR Nighthawk M7 Pro - Perform a Factory Reset; Disable or Re-Enable Device Analytics

The Time Format page displays.
4. Tap a time format, then tap Ok.
Your mobile hotspot uses the new time format.
Perform a factory reset
In some cases, you might want to reset your mobile hotspot to factory settings.
Performing a factory reset clears all settings from your mobile hotspot and initiates the
first-time setup process.
To perform a factory reset:
1. Quickly press and release the Power button to wake your mobile hotspot.
The lock screen displays.
2. Swipe up to unlock your mobile hotspot.
The home screen displays.
3. Tap Settings > More > Factory Reset.
The Factory Reset page displays.
4. Tap Reset Now.
Your mobile hotspot prompts you to confirm the factory reset.
5. Tap Confirm.
Your mobile hotspot restarts with factory settings.
Disable or re-enable device
analytics
NETGEAR improves its products and services by automatically sending daily diagnostic
and usage data. Device analytics are enabled by default.
To disable or re-enable device analytics:
1. Quickly press and release the Power button to wake your mobile hotspot.
The lock screen displays.
2. Swipe up to unlock your mobile hotspot.
The home screen displays.
3. Tap Settings > More > Analytics.
User Manual51Adjust network, security, and
performance settings
Nighthawk M7 Pro