NETGEAR Nighthawk M7 Pro - Change the Date and Time Format from the Web User Interface; Disable or Re-Enable VPN Passthrough from the Web User Interface

Change the date and time format
from the web user interface
Your mobile hotspot is initially set to display a date and time format that is common for
your region. However, if you prefer to use a different date and time format, you can
change the format that your device uses.
To change the date and time format from the web user interface:
1. From the web user interface dashboard, select Settings > Advanced > Device.
The Device page displays.
2. In the Date Time Format section, select an option for the following settings:
•
Date Format
•
Time Format
3. Click or tap Apply.
Your settings are saved.
Disable or re-enable VPN
passthrough from the web user
interface
To connect to a corporate network using VPN, VPN connections (passthrough) must be
enabled. VPN passthrough is enabled by default, but you can disable it from the web
user interface.
To disable or re-enable VPN passthrough from the web user interface:
1. From the web user interface dashboard, select Settings > Advanced > Other.
The Other page displays.
2. In the VPN Passthrough section, clear the Enable check box to disable VPN
passthrough, or select the check box to re-enable it.
VPN passthrough is enabled by default.
3. Click or tap Apply.
Your settings are saved.
User Manual76Access the web user interface
Nighthawk M7 Pro