NETGEAR Nighthawk M7 Pro - Change the Web User Interface Login Password; Back up Mobile Hotspot Settings from the Web User Interface

Change the web user interface
login password
Your mobile hotspot is set up to use a default web user interface login password. The
default password is printed on a label in the battery compartment. You can optionally
change the default password to your own password.
To change the web user interface login password:
1. From the web user interface dashboard, select Settings > Administration > Set
Password.
The password settings are displayed.
2. In the New Password field, enter the password that you want to use.
The maximum password length is 31 characters.
3. Click or tap Apply.
Your settings are saved.
Back up mobile hotspot settings
from the web user interface
You can back up and restore settings. Backing up and restoring is useful if you use more
than one device and you want the same settings on all of your devices.
You can also save your settings before resetting to factory defaults or changing the
settings.
To back up mobile hotspot settings from the web user interface:
1. From the web user interface dashboard, select Settings > Administration > Backup
Settings. The Backup Settings page displays.
2. Click or tap Backup. By default, the file (export.cfg) is saved to your Downloads
folder.
User Manual65Access the web user interface
Nighthawk M7 Pro