NETGEAR Nighthawk M7 Pro - Change the Wifi Network Name and Password; Enable or Disable Guest Wifi

WiFi or Ethernet offloading is active.
Change the WiFi network name and
password
The WiFi network name (SSID) identifies your WiFi network and is visible to other
WiFi-enabled devices.
To change the WiFi network name and password from your mobile hotspot:
1. Quickly press and release the Power button to wake your mobile hotspot.
The lock screen displays.
2. Swipe up to unlock your mobile hotspot.
The home screen displays.
3. Tap WiFi > WiFi Info.
The WiFi page displays.
4. Scroll down and tap the Pencil (Edit) icon beside the name or password.
A message displays telling you that currently connected devices must re-authenticate
to the network with the updated information.
5. Tap Continue.
6. Enter a new WiFi network name and password.
7. Tap Done.
Your settings are saved.
Enable or disable Guest WiFi
You can turn on Guest WiFi to share your Internet connection with temporary visitors
on a separate connection from your personal WiFi devices. Guest WiFi is disabled by
default.
To enable or disable Guest WiFi:
1. Quickly press and release the Power button to wake your mobile hotspot.
The lock screen displays.
2. Swipe up to unlock your mobile hotspot.
The home screen displays.
User Manual34Adjust network, security, and
performance settings
Nighthawk M7 Pro