NETGEAR Nighthawk M7 Pro - Configure Website Filters from the Web User Interface

Configure website filters from the
web user interface
You can set up a filter to block or allow access to websites that you specify. You can also
set up a list of devices that are unrestricted. The website filtering does not apply to
unrestricted devices.
To configure website filters from the web user interface:
1. From the web user interface dashboard, select Settings > Security > Website
Filters.
The Website Filters page displays.
2. Select the Enable check box.
3. From the Filter Type menu, select Block List or Allow List.
Depending on your selection, a Blocked Websites list or an Allowed Websites list
displays.
4. To add a website to the list, click or tap Add and enter the website.
The website is added to the list.
5. To edit an entry in the list, do the following:
a. Select its check box.
b. Click the Edit icon.
c. Enter the changes.
6. To remove a website from the list, select its check box and then click or tap Delete.
The website is removed from the list.
7. To create a list of unrestricted devices, do the following:
a. In the Unrestricted Devices section, click or tap Add.
b. Select the device.
The device is added to the list.
8. Click or tap Apply.
Your settings are saved.
User Manual63Access the web user interface
Nighthawk M7 Pro