Power on your hotspot and finish
setup
After configuring your mobile hotspot for travel or fixed usage, power on the device to
complete the setup process.
NOTE: When idle, the touch screen goes dark to save power. Quickly press and
release the Power button to wake the screen.
To power on your hotspot and finish setup:
1. Press and hold the Power button for two seconds.
The NETGEAR logo displays and your mobile hotspot starts up.
The welcome screen displays.
2. Tap to select a device language.
3. Tap Let's go.
4. Follow the onscreen instructions to set up a unique WiFi network name, WiFi
password, and admin password.
Customizing your WiFi settings helps to protect your mobile hotspot’s WiFi network.
NOTE: If you don't customize your the settings, your device uses the WiFi
network name, WiFi password, and admin password printed on the label
underneath the battery.
5. Tap Done.
The home screen displays.
Your mobile hotspot is set up.
User Manual16Overview and Setup
Nighthawk M7 Pro
To Next Page
Loading...
