Your mobile hotspot prompts you to enter the current four-digit passcode.
Screen Lock is disabled.
Enable or disable a WiFi schedule
You can configure your mobile hotspot to broadcast its WiFi connection only at certain
times during the day, or only on certain days. The WiFi Schedule is disabled by default.
NOTE: To set up the WiFi Schedule details, you must connect to your mobile
hotspot's web user interface. From the hotspot, you can only turn a previously
configured schedule on or off. For more information, see Configure a WiFi
schedule from the web user interface on page 64.
To enable or disable a WiFi Schedule:
1. Quickly press and release the Power button to wake your mobile hotspot.
The lock screen displays.
2. Swipe up to unlock your mobile hotspot.
The home screen displays.
3. Tap Settings > Security > Schedule.
The Schedule page displays.
4. Tap OFF > Ok.
Your WiFi schedule is enabled.
5. To disable a WiFi schedule after enabling it, tap ON > Ok from the Schedule page.
Your WiFi schedule is disabled.
Enable or disable IP passthrough
Depending on how you use your mobile hotspot, you might want to enable IP
passthrough. When IP passthrough is enabled, your mobile hotspot takes the IP address
that your cellular service provider assigned to your device and passes it through to a
connected device.
Enabling IP passthrough can help prevent a double network address translation (double
NAT) scenario when you connect your mobile hotspot to a downstream routing device.
When double NAT occurs, you might experience problems with secure websites that
use SSL, VPN connections, online games, and other communication problems.
User Manual48Adjust network, security, and
performance settings
Nighthawk M7 Pro
To Next Page
Loading...
