NETGEAR Nighthawk M7 Pro - Change the Displayed Date Format; Change the Displayed Time Format

•
To enable or disable USB tethering entirely, tap the ON or OFF button.
•
To allow Internet connections via WiFi or USB tether, tap USB Tether.
•
To restrict Internet connections to a USB tethered device, tap USB Tether Only
(Disables WiFi).
NOTE: Your mobile hotspot might need to restart.
Change the displayed date format
Your mobile hotspot is initially set to display a date format that is common for your
region. However, if you prefer to use a different date format, you can change the format
that your device uses.
To change displayed date format:
1. Quickly press and release the Power button to wake your mobile hotspot.
The lock screen displays.
2. Swipe up to unlock your mobile hotspot.
The home screen displays.
3. Tap Settings > More > Date Format.
The Date Format page displays.
4. Tap a date format, then tap Ok.
Your mobile hotspot uses the new date format.
Change the displayed time format
By default, your mobile hotspot's clock displays a time format that is common for your
region. However, if you prefer to use a different time format, you can change the clock
format.
To change displayed time format:
1. Quickly press and release the Power button to wake your mobile hotspot.
The lock screen displays.
2. Swipe up to unlock your mobile hotspot.
The home screen displays.
3. Tap Settings > More > Time Format.
User Manual50Adjust network, security, and
performance settings
Nighthawk M7 Pro