Enable or disable roaming data
By default, your mobile hotspot does not use roaming data on the cellular data plan
linked to your SIM card. Roaming data might be subject to additional fees or costs from
your cellular carrier. However, you might want to enable roaming data in situations
where a consistent cellular data connection is more important than paying any additional
fees or costs.
To enable or disable roaming data:
1. Quickly press and release the Power button to wake your mobile hotspot.
The lock screen displays.
2. Swipe up to unlock your mobile hotspot.
The home screen displays.
3. Tap Settings > Mobile > Roaming Data.
The Roaming Data page displays.
4. Tap OFF > Ok.
Roaming data is enabled.
5. To disable roaming data after enabling it, tap ON > Ok from the Roaming Data page.
Roaming data is disabled.
Enable or disable Airplane Mode
You can turn on Airplane Mode to disable cellular service, but keep your WiFi or Ethernet
connection active. Airplane Mode is disabled by default.
To enable or disable Airplane Mode:
1. Quickly press and release the Power button to wake your mobile hotspot.
The lock screen displays.
2. Swipe up to unlock your mobile hotspot.
The home screen displays.
3. Tap Settings > Airplane Mode.
The Airplane Mode page displays.
4. Tap OFF > Ok.
User Manual43Adjust network, security, and
performance settings
Nighthawk M7 Pro
To Next Page
Loading...
