Share a USB Printer
107
Nighthawk AC1900 Smart WiFi Router
Install the Printer Driver and Cable the Printer
Some USB printer manufacturers (for example, HP and Lexmark printers) request that you
do not connect the USB cable until the installation software prompts you to do so.
To install the driver and cable the printer:
1. On each computer on your network that shares the USB printer
, install the driver
software for the USB printer.
If you do not have the printer driver, contact the printer manufacturer.
2. Use a USB printer cable to connect the USB printer to the router USB port.
USB port
Download the ReadySHARE Printer Utility
The utility works on Windows and Mac computers.
To download the utility:
1. V
isit www.netgear.com/readyshare.
2. Click the PRINT - Learn how you can print wirelessly from many devices link.
3. Click one of the following links to download the ReadySHARE Printer utility setup file:
• Download PC installer and get started. Download the utility for Windows
computers.
• Download Mac installer and get started. Download the utility for MAC computers.
• Download the genie
App and get started. Download the genie app to set up
AirPrint with your iOS device.
4. Follow the onscreen instructions to install the ReadySHARE Printer utility
.
Install the ReadySHARE Printer Utility
You must install the ReadySHARE Printer utility on each computer that will share the printer.
After you install it, the utility displays as NETGEAR USB Control Center on your computer.
To Next Page
Loading...
Need help?
General
