Hardware Setup
12
Nighthawk AC1900 Smart WiFi Router
Position Your Router
The router lets you access your network anywhere within the operating range of your wireless
network. However, the operating distance or range of your wireless connection can vary
significantly depending on the physical placement of your router. For example, the thickness
and number of walls the wireless signal passes through can limit the range.
Additionally, other wireless access points in and around your home might affect your router’s
signal. Wireless access points are routers, repeaters, WiFi range extenders, or any other
device that emits a wireless signal for network access.
To position your router:
1. Place your router near the center of the area where your computers and other devices
operate, and within line of sight to your wireless devices.
2. Make sure that the router is within reach of an AC power outlet and near Ethernet cables
for wired computers.
3. Place the router in an elevated location, minimizing the number walls and ceilings between
the router and your other devices.
4. Place the router away from electrical devices such as these:
• Ceiling fans
• Home security systems
• Microwaves
• Computers
• Base of a cordless phone
• 2.4 GHz cordless phone
5. Place the router away from large metal surfaces, large glass surfaces, and insulated walls
such as these:
• Solid metal door
• Aluminum studs
• Fish tanks
• Mirrors
• Brick
• Concrete
6. (Optional) If you have adjacent access points, use different radio frequency channels to
reduce interference.
To Next Page
Loading...
Need help?
General
