EasyManuals Logo

NETGEAR R7000 User Manual

NETGEAR R7000
194 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #68 background imageLoading...
Page #68 background image
Share USB Devices Attached to the Router
68
Nighthawk AC1900 Smart WiFi Router
Connect a USB Device to the Router
To connect a USB storage device to the router:
1. Connect your USB storage device to the USB port on the router.
The blue, USB 3.0 port on the front of the router performs faster than the USB 2.0 port on
the rear panel of the router.
2. If your USB storage device uses a power supply, connect it.
You must use the power supply when you connect the USB storage device to the router.
When you connect the USB storage device to the router’s USB port, it might take up to
two minutes before it is ready for sharing. By default, the USB storage device is available
to all computers on your local area network (LAN).
Access the USB Device from a Mac
To access the USB storage device from a Mac :
1. Connect your USB storage device to the USB port on the router.
The blue, USB 3.0 port on the front of the router performs faster than the USB 2.0 port on
the rear panel of the router.
2. If your USB storage device uses a power supply, connect it.
You must use the power supply when you connect the USB storage device to the router.
When you connect the USB storage device to the router’s USB port, it might take up to
two minutes before it is ready for sharing. By default, the USB storage device is available
to all computers on your local area network (LAN).
3. On a Mac that is connected to the network, launch Finder and select Go > Connect to
Server.
The Connect to Server window displays.
4. Enter the smb://readyshare in the Server Address field.
5. Click the Connect button.
6. When prompted, select the Guest radio button.
7. If you set up access control on the router and you allowed your Mac to access the network,
select the Registered User radio button and enter admin for the name and password for the
password.
For more information about access control, see Allow or Block Access to Your Network
on page 58.
8. Click the Connect button.
A window displays the files and folders on the device.

Table of Contents

Other manuals for NETGEAR R7000

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the NETGEAR R7000 and is the answer not in the manual?

NETGEAR R7000 Specifications

General IconGeneral
BrandNETGEAR
ModelR7000
WiFi Technology802.11ac
USB Ports1 x USB 3.0, 1 x USB 2.0
Antennas3 external antennas
BeamformingYes
RAM256 MB
Flash Memory128 MB
Frequency Band2.4 GHz / 5 GHz
WiFi SpeedUp to 1900 Mbps
Processor1 GHz dual-core processor
Ethernet Ports5 (1 WAN & 4 LAN)
SecurityWPA/WPA2
Dimensions285 x 184.5 x 50 mm (11.22 x 7.26 x 1.97 in)
Weight750 g

Related product manuals