NETGEAR R7000 User Manual

Share USB Devices Attached to the Router
67
Nighthawk AC1900 Smart WiFi Router
USB Device Requirements
The router works with most USB-compliant external flash and hard drives. For the most
up-to-date list of USB drives that the router supports, visit
http://kbserver.netgear.com/readyshare.
Some USB external hard drives and flash drives require you to load the drivers onto the
computer before the computer can access the USB storage device. Such USB storage
devices do not work with the router
.
The router supports the following file system types for full read/write access:
• FAT16, FAT32
• NTFS
• NTFS with compression format enabled
• Ext2, Ext3, Ext4
• XFS
• HFS
• HFS+
Access a USB Device on the Network
ReadySHARE lets you access and share a USB storage device connected to the router USB
port. (If your USB storage device uses special drivers, it is not compatible.)
USB 3.0 port
Figure 9. The blue USB 3.0 port on the front of the router provides the fastest access

NETGEAR R7000 Specifications

General

Brand	NETGEAR
Model	R7000
WiFi Technology	802.11ac
USB Ports	1 x USB 3.0, 1 x USB 2.0
Antennas	3 external antennas
Beamforming	Yes
RAM	256 MB
Flash Memory	128 MB
Frequency Band	2.4 GHz / 5 GHz
WiFi Speed	Up to 1900 Mbps
Processor	1 GHz dual-core processor
Ethernet Ports	5 (1 WAN & 4 LAN)
Security	WPA/WPA2
Dimensions	285 x 184.5 x 50 mm (11.22 x 7.26 x 1.97 in)
Weight	750 g