NETGEAR R7000 User Manual

Manage Your Network
150
Nighthawk AC1900 Smart WiFi Router
The following information displays:
• System Up Time. The time elapsed since the router was last restarted.
• Port. The statistics for the WAN (Internet) and LAN (Ethernet) ports. For each port,
the page displays:
- Status. The link status of the port.
- TxPkts. The number of packets transmitted on this port since reset or manual
clear.
- RxPkts. The number of packets received on this port since reset or manual clear.
- Collisions. The number of collisions on this port since reset or manual clear.
- Tx B/s. The current transmission (outbound) bandwidth used on the WAN and
LAN ports.
- Rx B/s. The current reception (inbound) bandwidth used on the WAN and LAN
ports.
- Up Time. The time elapsed since this port acquired the link.
- Poll Interval. The interval at which the statistics are updated in this page.
7. To change the polling frequency, enter a time in seconds in the Poll Interval field and click
the Set Interval button.
8. To stop the polling entirely, click the Stop button.
Check the Internet Connection Status
 To check the Internet connection status:
1. Launch a web browser from a computer or WiFi device that is connected to the network.
2. Enter http://www.routerlogin.net.
A login window displays.
3. Enter the router user name and password.
The user name is admin. The default password is password. The user name and
password are case-sensitive.
The BASIC Home page displays.
4. Click the ADVANCED tab.

NETGEAR R7000 Specifications

General

Brand	NETGEAR
Model	R7000
Category	Wireless Router
Language	English