Specify Network Settings
140
Nighthawk AC1900 Smart WiFi Router
7. Click the setup bridge mode wireless settings button.
8. Specify the settings of the other router to which this router will connect.
a. Select the wireless network frequency (2.4 GHz or 5 GHz).
For 802.11ac mode, select 5 GHz.
b. In the Name (SSID) field, enter the wireless network name (SSID).
c. In the Security Option section, select a radio button.
d. If prompted, type the passphrase (the WiFi password that you use to connect
wirelessly to the other router).
9. Click the Apply button.
The settings for the other router are saved and the Advanced Wireless Settings page
displays.
10. Click the Apply button on the
Advanced Wireless Settings page.
Your changes take effect.
Set Up a Wireless Distribution System
The router can act as router a wireless base station or a wireless repeater in a wireless
distribution system (WDS). A WDS expands a wireless network through multiple access
points. A wireless base station connects to the Internet, can have wired and wireless clients,
and sends its wireless signal to an access point that functions as a wireless repeater. A
To Next Page
Loading...
Need help?
General
