Specify Network Settings
144
Nighthawk AC1900 Smart WiFi Router
7. Select the Wireless Repeater radio button.
8. In the Repeater IP Address field, type the IP address of the repeater router.
This IP address must be in the same subnet as the base station, but different from the
LAN IP address of the base station.
9. T
o prevent wireless clients from associating with the repeater and allowing LAN client
associations only, select the Disable Wireless Client Association check box.
You can leave the check box cleared if you prefer wireless clients to be able to associate
with the repeater
.
10. In the Base Station MAC Address field, enter the MAC addresses for the access point that
will be the base station.
11. Click the Apply button.
Your changes are saved.
12. V
erify connectivity across the LANs.
A computer on any wireless or wired LAN segment of the router can connect to the
Internet or share files and printers with any other computer or server connected to the
other access point.
To Next Page
Loading...
Need help?
General
