Control Access to the Internet
64
Nighthawk AC1900 Smart WiFi Router
4. Select ADVANCED > Security > E-mail.
5. Select the Turn Email Notification On check box.
6. In the Send to This E-mail
Address field, enter the email address to which logs and alerts
are sent.
This email address is also used for the From address. If this field is blank, log and alert
messages are not sent.
7. In the Y
our Outgoing Mail Server field, enter the name of your ISP outgoing (SMTP) mail
server (such as mail.myISP.com).
You might be able to find this information in the configuration page of your email program.
If you leave this field blank, log and alert messages are not sent.
8. In the Outgoing Mail Server Port Number field, enter your mail server
’s port number.
You might be able to find this information in the configuration page of your email program.
9. If your outgoing email server requires authentication, select the My Mail Server requires
authentication check box.
a. In the User Name field, type the user name for the outgoing email server
.
b. In the Password field, type the password for the outgoing email server
.
10. (Optional) Select the Send E-mail notification when a downloader task is finished check
box.
11. (Optional) Select the Send Alerts
Immediately check box.
Email alerts are sent immediately when someone attempts to visit a blocked site.
12. T
o send logs based on a schedule, specify these settings:
• From Send logs according to this schedule drop-down list, select the schedule
type.
• From the Day drop-down list, select the day
.
• From the T
ime drop-down list, select the time, and select the am or pm radio button.
13. Click the Apply button.
To Next Page
Loading...
Need help?
General
