an empty disk bay. For information about how to install a disk, see Add a Disk on page
82.
Use only supported SATA hard disk drives (HDDs) or solid-state drives (SSDs) in your
ReadyNAS storage system. If you use disks that are not supported, NETGEAR technical
support will not provide assistance. For a list of supported disks, see the NETGEAR
Hardware Compatibility List at http://www.netgear.com/readynas-hcl.
If you are adding a previously formatted disk to your storage system, see the instructions
in Previously Formatted Disks on page 80.
Hardware Manual11Getting Started
ReadyNAS OS 6
To Next Page
Loading...
