5.
Press and hold the Reset button for four seconds to confirm your boot menu
selection.
The system boots in the selected boot mode.
Note: If you do not hold the Reset button long enough, the press moves the system
to the next selection. Repeat the press and hold for one second to scroll through to
your desired selection.
Rack Mounting
You can rack-mount the ReadyNAS 3138 using the included rack-mount ears.
Alternatively, you can use the optional sliding rail kit, order number RRAIL04-10000S.
For instructions see the 1U Rail Installation Guide, which is available at
http://support.netgear.com/product/ReadyNAS-OS6.
Hardware Manual46ReadyNAS 3138
ReadyNAS OS 6
To Next Page
Loading...
