Safety Warnings
1.
The equipment contains no operator access areas and is certified for installation
only by trained personnel, according to the installation instructions provided with
each storage system.
2. Install the socket-outlet near the equipment in an easily accessible location.
3. Observe the on-board battery precautions. Follow the battery replacement
instructions explained in Replace the On-Board Battery on page 105.
Danger: Replacing the battery with an incorrect type creates a danger of explosion.
Replace the battery the same or an equivalent type recommended by NETGEAR
only. Dispose of used batteries according to the manufacturer's instructions.
Installing the on-board battery upside down, which reverses its polarities, creates a
risk of explosion. Take care to install the battery correctly.
4. Connect the storage systems and their associated LAN connections only to equipment
within the same building.
5.
Slide-mounted or rail-mounted equipment is not to be used as a shelf or a work
space.
Hardware Manual123Defaults and Technical
Specifications
ReadyNAS OS 6
To Next Page
Loading...
