Table 7. Rear panel status indicators (Continued)
DescriptionIndicator
Two LED status indicators are built into each 1G Ethernet port. The left LED is green
and indicates the link and activity. The right LED is a bicolor LED that can light amber
or green and that indicates the port speed. These LEDs indicate port speed and
activity as follows:
•
Left LED solid green, right LED solid green. 1 Gbps connection speed, no
activity.
•
Left LED blinking green, right LED solid green. 1 Gbps connection speed,
activity.
•
Left LED solid green, right LED solid amber. 100 Mbps connection speed, no
activity.
•
Left LED blinking green, right LED solid amber. 100 Mbps connection
speed, activity.
•
Left LED solid green, right LED off. 10 Mbps connection speed, no activity.
•
Left LED blinking green, right LED off. 10 Mbps connection speed, activity.
•
Left LED off, right LED off. No connection.
1G Ethernet LAN port
LEDs
Two LED status indicators are built into each 10G Ethernet port. The left LED is green
and indicates the link and activity. The right LED is a bicolor LED that can light amber
or green and that indicates the port speed. These LEDs indicate port speed and
activity as follows:
•
Left LED solid green, right LED solid green. 10 Gbps connection speed, no
activity.
•
Left LED blinking green, right LED solid green. 10 Gbps connection speed,
activity.
•
Left LED solid green, right LED solid amber. 1 Gbps connection speed, no
activity.
•
Left LED blinking green, right LED solid amber. 1 Gbps connection
speed, activity.
•
Left LED solid green, right LED off. 100 Mbps connection speed, no activity.
•
Left LED blinking green, right LED off. 100 Mbps connection speed, activity.
•
Left LED off, right LED off. No connection.
Models 4312X and 4312X
v2 only:
10G Ethernet port LEDs
Two LED status indicators are built into each SFP+ port. Both LEDs are green. The
left LED indicates the link and activity. The right LED indicates the port speed. These
LEDs indicate port speed and activity as follows:
•
Left LED solid green, right LED solid green. 10 Gbps connection speed, no
activity.
•
Left LED blinking green, right LED solid green. 10 Gbps connection speed,
activity.
•
Left LED off, right LED off. No connection.
Models 4312S and 4312S
v2 only:
SFP+ port LEDs
Hardware Manual66ReadyNAS 3312, 3312 v2, 4312,
and 4312 v2
ReadyNAS OS 6