3. Use the provided mounting screws to mount the inner rails to the system chassis, as
follows:
a.
Fasten the backs of the outer rails to the rack with screws.
b. Press the release to extend the rails.
c.
Hang the hooks of the rails in the rack holes, and fasten the rails to the rack.
4.
Attach the chassis to the rack, as follows:
a.
Extend the ball shuttle to the very front.
b. Align the rails and push the chassis in.
c. Secure the handles to the outer rails with screws.
The rack-mount installation is complete.
Hardware Manual71ReadyNAS 3312, 3312 v2, 4312,
and 4312 v2
ReadyNAS OS 6
To Next Page
Loading...
