10.
Configure the WiFi bridge settings on the access point at the other end of the WiFi
bridge and restart that access point.
If the device at the other end of the WiFi bridge is a NETGEAR model WAC505,
WAC510, WAC540, or WAC564 access point, you do not need to restart it.
The WiFi bridge is established.
11.
Verify connectivity across the LANs of both access points.
If the configuration is set up correctly, a computer on any WiFi or wired LAN segment
of the access point that functions as the WiFi repeater can connect to the Internet
or share files and printers with any other computer or server connected to the access
point that functions as the WiFi base station.
User Manual106Manage the Advanced WiFi and
Radio Features
Insight Managed Smart Cloud Wireless Access Point WAC510 User Manual
To Next Page
Loading...
