NETGEAR WAC510 - Chapter 7 Manage and Maintain the Access Point

7
Manage and Maintain the Access
Point
This chapter describes how you can manage and maintain the access point.
The chapter includes the following sections:
• Change the management mode to NETGEAR Insight or Web-browser
• Change the system mode to Router mode or AP mode
• Change the country or region of operation
• Change the admin user account password
• Change the system name
• Specify a custom NTP server
• Set the time zone
• Manage the syslog settings
• Manage the firmware of the access point
• Manage the configuration file of the access point
• Reboot the access point from the local browser interface
• Schedule the access point to reboot
• Return the access point to its factory default settings
• Enable or disable Secure Shell
• Enable SNMP and manage the SNMP settings
• Manage the LEDs
159