10. Click the Apply button.
Your settings are saved. For information about manually adding MAC addresses to
those in the Trusted Stations table or Untrusted Stations table, see Manually set up
a MAC access control List on page 110.
For more information about applying an ACL to a WiFi network, see Select a MAC
ACL for a WiFi network on page 61.
WiFi devices in the Trusted Stations table can access the WiFi network to which you
apply the ACL. WiFi devices in the Untrusted Stations table cannot access the WiFi
network to which you apply the ACL.
Manage user accounts
User accounts provide either read/write or read-only access to the local browser interface
of the access point. You can add, change, or delete user accounts. You cannot delete
or change the default admin user account except for the password.
The following sections describe how you can manage user accounts:
• Add a user account
• Change the settings for a user account
• Remove a user account
For information about changing the password for the default admin user account, see
Change the admin user account password on page 164.
Add a user account
To add a user account:
1.
Open a web browser from a computer that is connected to the same network as the
access point or directly to the access point through an Ethernet cable or WiFi
connection.
2. Enter the IP address that is assigned to the access point.
A login window opens.
If your browser does not open the login window but displays a security message
and does not let you proceed, see Log in to the access point after initial setup on
page 41.
3. Enter the access point user name and password.
The user name is admin. The password is the one that you specified the first time
that you logged in. The user name and password are case-sensitive.
User Manual117Manage Access and Security
Insight Managed Smart Cloud Wireless Access Point WAC510 User Manual
To Next Page
Loading...
